Towing Eye Bolt - Mercedes-Benz 2009 CLS-Class Operator's Manual

Installing towing eye bolt
Depending on whether you are towing a vehi-
cle or you are being towed, the towing eye
bolt can be screwed into threaded holes
which are located behind covers on each
bumper.
The towing eye bolt is supplied with the vehi-
cle tool kit, located underneath the trunk floor
( Y page 250).
X
Take the vehicle tool kit out of the trunk.
Removing cover in front bumper
Cover
1
X
Press mark on cover as indicated by the
1
arrow.
X
Lift cover off to reveal the threaded hole
1
for the towing eye bolt.
Removing cover in rear bumper
G Warning!
In order to avoid possible serious burns or
injury, use extreme caution when removing
the rear cover, because the rear exhaust
pipe is extremely hot.
Cover
1
Practical hints
Towing the vehicle
X
Press on cover as indicated by the
1
arrow.
X
Fold cover down to reveal the threaded
1
hole for the towing eye bolt.
Fixing towing eye bolt
Example illustration front bumper

Towing eye bolt

1
X
Take the towing eye bolt
1
wrench from the vehicle tool kit.
X
Screw towing eye bolt clockwise into
1
threaded hole to its stop.
X
Insert wheel wrench into towing eye and
tighten towing eye bolt by turning it
1
clockwise.
and the wheel
Z
327