Wake On Ring
This option allow user to determine the action of the system power is off and the modem is
ringing.
Enabled
Disabled
Note: This item must enabled if you're running under Windows operating system.
Wake On RTC Alarm
You can set "RTC Alarm Resume" item to enabled and key in Data/time to power on
system.
Enabled
Enable alarm function to POWER ON system. (Default value)
Disabled
Disable this function.
Note: This item must enabled if you're running under Windows operating system.
Reset Configuration Data
Yes
Reset all configuration data.
No
Do not make any changes. (Default value)
NumLock
This option allows user to select power-on state for NumLock.
Enable NumLock.
On
Disable this function.
Off
Enable Wake On Ring. (Default value)
Disable this function.
4 1
BIOS Setup