Controls in detail
Memory function
M
Memory button
1 2 3 Memory position buttons
Switch on the ignition ( page 344).
or
Open the respective door.
366
Storing positions into memory
Adjust the seat ( page 347) to the de-
sired position.
On the driver's side: Adjust the steering
wheel ( page 359) and the exterior
rear view mirrors ( page 361) to the
desired position.
Press memory button M.
Release memory button M and press
one of the memory position buttons
within 3 seconds.
All the settings are stored with the se-
lected position.
Recalling positions from memory
!
Do not operate the power seats using the
memory button if the seat backrest is in an ex-
cessively reclined position. Doing so could cause
damage to front or rear seats.
First move seat backrest to an upright position.
Press and hold one of the position
buttons until the seat, steering wheel
and exterior rear view mirrors have fully
moved to the stored positions.
i
Releasing the button immediately stops
movement to the stored positions.
The multicontour seat* and/or lumbar support
will continue to be adjusted.