Control systems
COMAND navigation system (destination memory)
Example illustration: destination memory
list with input characters
1 Input characters
In the destination memory list with input
characters 1, the input characters are au-
tomatically activated.
Destination memory list without in-
put characters: Press n immediately.
or
220
Destination memory list with input
characters: Slide qm repeatedly until
the input characters disappear.
The list entry "My Address" is automat-
ically highlighted as long as you have
not entered any characters using the
input characters.
If you have entered characters
from the list of input characters:
ymz
or slide qm repeatedly
Rotate
until the list entry "My Address" is
highlighted.
Press n.
Further operation depends on whether you
want to enter the address manually or use
an address book entry as your own ad-
dress.
Entering an address manually
If you want to assign your own ad-
dress for the first time: Select "Save
new entry".
or
If you want to change your own ad-
dress: Select "Change"
entry".
In both cases, the address input menu ap-
pears.
Enter the address. Proceed as de-
scribed for destination entry in the "En-
tering a destination by address"
section ( page 172).
Select "Save" after entering the ad-
dress.
Your address is saved.
"Save new