Mercedes-Benz 2007 G-Class Operator's Manual page 52

Fastening the rear center seat belt
Pull both latch plates 1 and 2 out of
the attachment ( page 50).
The seat belt has two latch plates:
Plate 1 is fixed at the end of the seat
belt. Latch plate 2 is free-sliding
across the seat belt.
With a smooth motion, pull the seat
belt out of the seat belt outlet.
Push fixed latch plate 1 into
buckle 3 until it clicks.
Getting started
Guide the seat belt at free-sliding latch
plate 2 across your body.
Place the shoulder portion of the seat
belt across the top of your shoulder
and the lap portion across your hips.
Push free-sliding latch plate 2 into
buckle 4 until it clicks.
If necessary, tighten the lap portion to
a snug fit by pulling shoulder portion
up.
Driving
51