Table of Contents
Advertisement
The Rear Parking Assist system monitors
the rear surrounding of your vehicle with
four sensors in the rear bumper.
1 Sensors
Range of the sensors
To function properly, the sensors must be
free of dirt, ice, snow, and slush. Clean the
sensors regularly, being careful not to
scratch or damage the sensors, see
"Cleaning the Rear Parking Assist sensors"
( page 318).
!
During parking maneuvers, pay special
attention to objects located above or below the
height of the sensors (e.g. planters or trailer
hitches). The Rear Parking Assist system will not
detect such objects at close range and damage
to your vehicle or the object may result.
Ultrasonic signals from outside sources (e.g.
working jackhammers, car wash, or the air
brakes of trucks) may impair the operation of the
Rear Parking Assist system.
Controls in detail
Driving systems
201
Advertisement
Table of Contents
