Table of Contents
Advertisement
Operation
Engine compartment
Checking engine oil level with the
control system
When checking the oil level
the vehicle must be parked on level
ground
with the engine at operating tempera-
ture, the vehicle must have been sta-
tionary for at least 5 minutes with the
engine turned off
with the engine not at operating tem-
perature yet, the vehicle must have
been stationary for at least 30 minutes
with the engine turned off
To check the engine oil level via the
multifunction display, do the following:
Switch on the ignition ( page 39).
The standard display ( page 140)
should appear in the multifunction
display.
270
Press button k or j on the
multifunction steering wheel until the
following message appears in the
multifunction display:
One of the following messages will
subsequently appear in the multi-
function display:
Engine oil
level
OK
Add
1.0 qt
to reach
maximum
oil level
(Canada:
1.0 liter
)
Add
1.5 qts
to reach
maximum
oil level
(Canada:
1.5 liters
Add
2.0 qts
to reach
maximum
oil level
(Canada:
2.0 liters
i
If you want to interrupt the checking
procedure, press button k or j on the
multifunction steering wheel.
)
)
Advertisement
Table of Contents
