Table of Contents
Advertisement
Practical hints
Replacing bulbs
Left tail lamp unit shown, right tail lamp
unit laterally reversed
3 Turn signal lamp bulb
4 Brake, tail, parking and standing lamp
bulb
5 Tail, parking and standing lamp bulb
Press gently onto respective
bulb 3, 4, or 5 and turn counter-
clockwise out of its bulb socket.
Press the new bulb gently into the bulb
socket and turn clockwise until it
engages.
Reinstall tail lamp lens 2.
Install and tighten securing screws 1.
386
i
Do not overtighten securing screws 1.
Otherwise tail lamp lens 2 could be damaged.
Rear fog lamp bulb/Backup lamp bulb
The following description applies to both,
the rear fog lamp and the backup lamp.
Rear fog lamp shown
1 Securing screw
2 Lamp lens
Loosen and remove securing
screws 1.
Remove lamp lens 2.
3 Bulb
Press gently onto bulb 3 and turn
counterclockwise out of its bulb
socket.
Press the new bulb gently into the bulb
socket and turn clockwise until it
engages.
Reinstall lamp lens 2.
Install and tighten securing screws 1.
i
Do not overtighten securing screws 1.
Otherwise lamp lens 2 could be damaged.
Advertisement
Table of Contents
