Important Safety Information - Dunkirk 95M-200 Control Manual And Troubleshooting Manual

General
Boiler installation shall be completed by qualifi ed agency.
WARNING
!
Fire, explosion, asphyxiation and electrical shock
hazard. Improper installation could result in death or
serious injury. Read this manual and understand all
requirements before beginning installation.
Keep this manual near boiler
Retain for future reference
Become familiar with symbols identifying Become familiar with symbols identifying
potential hazards. potential hazards.
This is the safety alert symbol. Symbol alerts you to This is the safety alert symbol. Symbol alerts you to
potential personal injury hazards. Obey all safety messages potential personal injury hazards. Obey all safety messages
following this symbol to avoid possible injury or death. following this symbol to avoid possible injury or death.
DANGER
!
Indicates a hazardous situation which, if not avoided,
WILL result in death or serious injury
WARNING
!
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
! !
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTICE
Used to address practices not related to personal
injury.

2 - IMPORTANT SAFETY INFORMATION

Installation shall conform to requirements of
authority having jurisdiction or in absence of such
requirements:
• United States
• National Fuel Gas Code, ANSI Z223.1/NFPA 54.
• National Electrical Code, NFPA 70.
• Canada
• Natural Gas and Propane Installation Code, CAN/CSA
B149.1. and .2
• Canadian Electrical Code, Part I, Safety Standard for
Electrical Installations, CSA C22.1
Where required by authority having jurisdiction,
installation shall conform to Standard for Controls
and Safety Devices for Automatically Fired Boilers,
ANSI/ASME CSD-1.
Additional manual reset low water cutoff and/or manual
reset high limit may be required.
WARNING
!
Revision, modifi cation, substitution or elimination of
factory equipped, supplied or specifi ed components
could result in death or serious injury.
Use of this manual shall be by a qualifi ed heating installer or
service technician only.
Before programming control read and understand all instructions
including :
• Installation, Operation and Maintenance Manual,
• Parameter Guide
• Control Manual and Troubleshooting Guide
Perform all steps in order specifi ed.
3