Sony SPP-VT11 Operating Instructions Manual page 123

1 redial data button
Used to recall numbers previously dialed.
2 caller ID button
Used to recall numbers previously received.
3 H/S intercom button
Used to talk between two handsets.
4 talk button
volume button
Allows you to make or receive a call and to
adjust the handset volume during a phone
conversation.
5 (.) button
1
Used to repeat the current message.
6 button
tone button
Press to switch temporarily to tone dialing.
7 play button
Used to play back recorded messages.
8 hold/erase button
Used to hold a call and to modify or erase the
data stored in the handset directory.
9 Microphone
q; directory button
Used to recall numbers stored in the directory.
qa in use/charge lamp
Lights when the phone is in use or while
charging the battery pack.
qs off button
Disconnects a call.
qd (>) button
3
Used to skip the current message.
qf Dialing keys
button
qg
morning button
Used to set a morning call.
qh intercom button
Used to make an intercom call.
qj handset priority button
This button also allows the handset to ring 4
times before the base phone starts to ring.
qk flash/program button
Used to answer an incoming call during a
conversation and allows you to start various
setting operations.
ql Receive data indication
Displayed when the receive data directory is
used.
w; Redial indication
Displayed when searching for a list of redfialed
number.
wa Morning call indication
displayed when a morning call is set.
ws • Telephone number being dialed
• Receive data history
• Redial data history
• Approximate duration of a telephone
conversation
• Programed telephone number/name
• Information on intercom operation
• Morning call setting/time set for morning
call
• Self check indications
wd Battery indicator
Displayed when the battery pack is exhausted.
wf Cord hook
wg Battery pack connector
wh Battery compartment lid
123