Sony SPP-VT11 Operating Instructions Manual page 114

Switching phones during a call
(continued)
3 Tell the person on the handset that you
are switching phones.
4 Place the receiver on the base phone.
If nobody answers
Press to resume conversation on the base
intercom
phone.
Tips
• When using more than one handset, " (all handsets)"
and all the handset numbers are displayed.
• You can switch phones after putting the call on hold by
pressing
hold/message transfer
• If you return the receiver to the base phone after pressing
, a melody is heard from the base phone speaker.
intercom
The call can be answered either on the base phone or on a
handset.
• If an intercom call is terminated on the handset after step
3, you can resume the conversation on the base phone.
Note
The time counter displayed on the handset after switching
from the base phone shows the duration of operation from
the moment you started talking on the handset.
To switch from the handset to the
base phone
1 When using one handset:
Press
intercom
conversation.
When using more than one handset:
Press
intercom
conversation.
The phone is put on hold and a melody is heard.
2 When the base phone rings, pick up the
receiver.
You cannot use on-hook dialing.
3 Tell the person on the base phone that
you are switching phones.
4 Place the handset on the charger or press
.
off
If nobody answers
Press or
intercom
the handset.
114
.
during the phone
and during a phone
0
to resume the conversation on
talk
Tips
• You can switch phones after putting the call on hold by
pressing .
hold/erase
• If you return the handset to the charger or press
after pressing , a melody is heard from the base
intercom
phone speaker. The call can be answered either on the
base phone or on a handset.
• If an intercom call is terminated on the base phone after
step 3, you can resume the conversation on the handset.
To switch from one handset to another
(when using more than one handset)
1 Press during a phone
intercom
conversation.
2 Press the handset number.
For example: To switch from handset 1 to
handset 2, press
2
The phone is put on hold and a melody is heard.
3 When the handset rings, pick up the
handset from the charger or press
when it is not on the charger.
talk
4 Return the handset to the charger after
switching.
If nobody answers
Press or to resume the conversation on
intercom talk
the handset.
Tips
• You can switch phones after putting the call on hold by
pressing .
hold/erase
• On the switched handset, the handset number you are
using is displayed.
• When using more than one handset, the handset you are
using displays the numbers of the base phone number
("0") and the other handsets.
To talk between the handsets
You can talk between two handsets like talking on
walkie-talkies
For example: calling from handset 1 to handset 2
1 Press on handset 1.
intercom
2 When handset 2 rings, pick up the handset from
the charger or press
talk
charger.
3 Keep pressing
子機間通話
you hear the beep tone.
4 When you finish talking, release
5 To talk on handset 2, keep pressing
handset 2 and talk.
When you finish talking, release
off
on handset 1.
when it is not on the
and talk on handset 1 after
.
子機間通話
on
子機間通話
.
子機間通話