Table of Contents
Advertisement
Practical hints
Replacing wiper blades
Installing wiper blades
1 Recess
2 Tab
3 Locking
4 Taper piece
5 Square recess
376
Lift up the wiper arm as far as you need
to position the wiper blade under the
wiper arm and hold it.
!
Hold on to the wiper arm. If released, the
force of the impact from the tensioning spring
could crack the windshield.
Carefully fold the wiper arm back and
make sure that the taper piece 4
slides into the recess 1 at the wiper
blade.
!
Make certain that the square recess 5 on
the taper piece 4 is on the top, otherwise the
taper piece 4 cannot slide into the recess 1 at
the wiper blade. If the square recess 5 is not at
the top turn the taper piece 4 around to bring
the square recess 5 to the top.
Slide the tab 2 back in direction of
arrow 3 until it audibly engages.
The wiper blade is locked.
!
Make certain that the wiper blades are prop-
erly installed. Improperly installed wiper blades
may cause windshield damage.
Advertisement
Table of Contents
