Table of Contents
Advertisement
Speed dial
If you have stored telephone numbers
as speed dial numbers in your
telephone, you can also enter these
with buttons 1 to R on the radio
unit.
Press desired button 1 to R
briefly.
Press s button.
The call will be made.
Turbo dial
If you have stored telephone numbers
as turbo dial numbers in your
telephone, you can also enter these
with buttons 1 to R on the radio
unit.
Press desired button 1 to R
until the call is made.
Redial
If the number you have dialed is busy, you
can again place calls to the last ten
telephone numbers dialed using the redial
function.
i
If you have activated the automatic redial
function on your mobile telephone, the number
of the person being called is automatically redi-
aled after a short waiting period if there is a busy
signal.
Refer to the separate operating instructions for
the mobile telephone.
Manual redial
Press s button.
The telephone number last dialed
will appear in the display.
Controls in detail
Audio system
Select desired telephone number
with button ‚ or ƒ.
The letter
L
and the number of the
memory position appears in the
left-hand corner of the display. The
numbers are stored in the order of
the calls received.
When you have selected a number,
press s button.
The call will be made.
Accepting an incoming call
If the telephone is active in the background
(reception symbol is visible in the display),
the audio source is muted when an incom-
ing call is received. A ringing tone can be
heard and the caller's telephone number,
or the name under which the telephone
number has been saved in the telephone
book, appears in the display. If the caller's
number is not relayed,
CALL
the display.
Press s button.
The call is accepted.
will appear in
217
Advertisement
Table of Contents
