Table of Contents
Advertisement
1 Cover plate
2 Cigarette lighter
Briefly press the bottom of cover
plate 1.
The cover plate opens automatically.
Push in cigarette lighter 2.
The cigarette lighter will pop out
automatically when hot.
!
The lighter socket can be used to accommo-
date 12V DC electrical accessories (up to a max-
imum of 85 W) designed for use with the
standard "cigarette lighter" plug type. Keep in
mind, however, that connecting accessories to
the lighter socket (for example extensive con-
necting and disconnecting, or using plugs that do
not fit properly) can damage the lighter socket.
With the socket damaged, the lighter may no
longer be able to be placed in the heating
(pushed-in) position, or the lighter may pop out
too early with the lighter not hot enough.
To help avoid damaging the cigarette lighter
socket, we recommend connecting 12V DC elec-
trical accessories designed for use with the stan-
dard "cigarette lighter" plug type to the 12V
power outlets ( page 243) in your vehicle
whenever possible.
Push down cover plate 1 to close
ashtray.
The cover plate engages.
Controls in detail
Useful features
Power outlet
The power outlet is located in the rear pas-
senger compartment.
1 Power outlet
2 Cover
Switch on the ignition ( page 32).
Pull at top of cover 2.
Flip cover 1 to the left and insert
electrical plug (cigarette lighter type).
i
The power outlet can be used to
accommodate 12V DC electrical accessories
(e.g. air pump, auxiliary lamps) up to a maximum
of 180 W.
243
Advertisement
Table of Contents
