Table of Contents
Advertisement
Controls in detail
Control system
Press button æ or ç to select
manual operation (
Manual
running lamp mode (
Constant
With daytime running lamp mode activated
and the exterior lamp switch in
position M or U, the low beam
headlamps are switched on when the
engine is running.
In low ambient light conditions the
following lamps will switch on additionally:
Parking lamps
Tail lamps
License plate lamps
Side marker lamps
For more information on the daytime
running lamp mode, see "Lighting"
( page 109).
140
i
For safety reasons, resetting the Lighting
) or daytime
submenu to factory settings ( page 131) while
driving will not deactivate the daytime running
).
lamp mode.
The following message appears in the
multifunction display:
Lighting - Cannot be completely reset
to factory settings while driving.
Setting locator lighting
With the locator lighting feature activated
and the exterior lamp switch in
position U, the following lamps will
switch on during darkness when the vehi-
cle is unlocked with the SmartKey:
Parking lamps
Tail lamps
License plate lamps
Side marker lamps
Front fog lamps
The locator lighting switches off when the
driver's door is opened.
If you do not open a door after unlocking
the vehicle with the SmartKey, the lamps
will switch off automatically after
approximately 40 seconds.
Move the selection marker with
button æ or ç to the
submenu.
Press button j or k repeatedly
until the message
Surround lighting
appears in the multifunction display.
The selection marker is on the current
setting.
Press button æ or ç to switch
the locator lighting function
Lighting
On
or
Off
.
Advertisement
Table of Contents
