Split Rear Bench Seat - Mercedes-Benz 2007 C 230 Operator's Manual

2007 c-class sedan
Table of Contents

Advertisement

Removing the ski sack
You can remove the ski sack for cleaning
or drying.
1 Button
2 Ski sack frame
3 Flap
Open trunk lid.
Press button 1.
The flap 3 opens downward.
Press button 1 firmly until ski sack
frame 2 is released.
Pull ski sack frame 2 with ski sack
out.
Warning!
Never drive vehicle with trunk open while
the ski sack is removed. Deadly carbon
monoxide (CO) gases may enter vehicle in-
terior, resulting in unconsciousness and
death.
i
To prevent unauthorized persons from ac-
cessing the trunk, always close the flap.
Installing the ski sack
Install the ski sack in the reverse order.
Push ski sack frame 2 with ski sack
inward until the ski sack frame snaps
into place.
Close flap 3.
Close trunk lid.
Controls in detail

Split rear bench seat*

G
To expand the cargo area, you can fold
down the left and right rear seat backrests.
The two sections can be folded down
separately.
Warning!
When expanding the luggage area, always
fold the seat cushions fully forward.
Unless you are transporting cargo, the
backrests must remain properly locked in
the upright position.
In an accident, during hard braking or
sudden maneuvers, loose items will be
thrown around inside the vehicle, and cause
injury to vehicle occupants unless the items
are securely fastened in the vehicle.
Always use the cargo tie down rings*
( page 236).
Loading
G
233

Advertisement

Table of Contents
loading

Table of Contents