Parts And Controls; Initial Mower Setup; Adjust The Handlebar - Honda HRR216PKUA Owner's Manual

PARTS AND CONTROLS

RECOIL
STARTER
GRIP
HANDLEBAR
ADJUST
(P. 3)
KNOB (2)
CLIP DIRECTOR
OIL FILLER CAP
(P. 5)
(P. 4)
HANDLEBAR
CUTTING HEIGHT
ADJUSTMENT
(P. 6)
LEVER (4)
SPARK PLUG
(P. 13)
CAP
CARBURETOR
FUEL VALVE ON
BLADE CONTROL
(P. 13)
LEVER
REAR
DISCHARGE
GUARD
FUEL TANK CAP
MUFFLER
GRASS BAG
(P. 5)
AIR FILTER
(P. 12)
FUEL VALVE OFF

INITIAL MOWER SETUP

List of Parts
With help from an assistant, carefully remove the mower and loose
parts from the carton and compare the loose parts against the
following list. Contact the authorised Honda dealer from whom you
purchased the mower if any of the loose parts shown are not included
with your mower.
Ref. Description
No.
(P. 7)
1 Grass bag frame
2 Grass bag
3 Owner's manual



Adjust the Handlebar

1. With the handlebar adjust knobs in the unlocked position, raise the
handlebar into the mowing position.
Take care not to kink
the cable.

2. Align the adjust knobs with one of the two holes on each handle
stay. Setting the adjust knobs in the lowest holes raises the
handlebar to its highest position.
3. Turn the handlebar adjust knobs 90 degrees into the lock position,
making sure both sides are positioned at the same height.
4. Remove all the cardboard from around the handlebar.
Qty.
1
1
1


HANDLEBAR
ADJUST KNOBS
UNLOCKED
LOCKED
3