Messaging - Callback - Mitel 5360 User Manual

Messaging - Callback

To leave a Callback Message when you hear busy or ringback tone:
Press (MESSAGE) or press the Callback softkey.
x
To respond to a message waiting condition on your phone:
1. Press (MESSAGE).
2. If a password is required, dial your password (and press the Enter softkey if available).
3. Press the Read Message softkey, and do one or all of the following:
To display the time the message was sent, press the More Msg softkey.
x
To display the number of the caller, press the More Msg softkey twice.
x
To call the message sender, press the Call softkey.
x
To delete the message, press the Erase Msg softkey.
x
To view the next message, press
x
You can check for messages from a remote station:
1. Press Superkey (must be programmed to a key).
2. Press the No softkey until "Remote Msging?" appears.
3. Press the Yes softkey.
4. Dial your directory number.
5. Press the Enter softkey.
6. If a password is required, enter your password and press the Enter softkey.
7. Press the Yes softkey.
You can set, change, or clear a password (up to 7 digits, not including 0):
1. Press Superkey (must be programmed to a key).
2. Press the No softkey until "Set Password?" appears.
3. Press the Yes softkey.
4. Do one of the following:
To enter a new password, enter your password.
x
To change or clear your password, enter your current password.
x
5. Press the Enter softkey.
(MESSAGE).
- 65 -
5360 IP Phone – User Guide