Mercedes-Benz 2005 C 230 Kompressor Sport Operator's Manual page 79

Installation of infant and child restraint
systems
This vehicle is equipped with tether
anchorages for a top tether strap at each
of the rear seating positions.
1 Cover of top anchorage ring
Make sure the rear backrest is locked
in its upright position ( page 257).
Warning!
Always lock backrest in its upright position
when rear seat bench is occupied by pas-
sengers, or the extended cargo area is not in
use. Check for secure locking by pushing
and pulling on the backrest.
Remove cover 1 from anchorage
ring 3.
Guide tether strap between head
restraint and top of seat back.
Head restraint must be positioned such
that the top tether strap can pass freely
between the head restraint and top of
seat back.
Make sure the tether strap is not
twisted.
Safety and Security
Occupant safety
G
2 Hook
3 Anchorage ring
Securely fasten hook 2, which is part
of the tether strap, to anchorage
ring 3.
Once the top tether anchorage hook is
attached, the child restraint itself can be
secured. Tighten the top tether strap
according to the child restraint
manufacturer's instructions.
77