Practical hints
Towing the vehicle
Installing towing eye bolt
1 Cover on right side of front bumper.
412
2 Cover on right side of rear bumper.
Removing cover
Press mark on cover 1 or 2 in
direction of arrows.
Lift cover off to reveal threaded hole for
towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located in the compartment under-
neath the trunk floor).
Screw towing eye bolt in to its stop and
tighten with lug wrench.
Reinstalling cover
Fit cover 1 or 2 and snap into place.