Table of Contents
Advertisement
The vehicle chassis ride height is raised or lowered
automatically according to the selected setting and to
the vehicle speed. This helps to increase vehicle
handling safety and lowers fuel consumption.
The selected setting is stored in memory, even with the
electronic key removed from the starter switch.
Warning!
To help avoid personal injury, keep hands and feet
away from wheel housing area, and stay away from
under the vehicle when lowering the vehicle
chassis.
Note:
See "ACTIVE BODY CONTROL" on page 320 for
malfunction and warning messages.
Driving systems
Instruments
Operation
and controls
287
Instrument
Driving
cluster display
Level control switch positions
Normal level – indicator lamps (3, 4) are not
illuminated. To change from raised level options I or II,
press lower half of switch (2) once respectively twice.
Raise level, option I – indicator lamp (3) is illuminated.
To change from normal level, press upper half (1) of
switch.
To change from raised level, option II, press lower
half (2) of switch.
Raised level, option 2 – indicator lamps (3, 4) are
illuminated.
To change from normal level or raised level, option I,
press upper half (1) of switch once respectively twice.
Normal level
Used for normal operation of the vehicle.
Speed dependent lowering of vehicle chassis
(approximate values):
• between 0 mph (0 km/h) and 35 mph (60 km/h) –
none
• between 35 mph (60 km/h) and 85 mph (140 km/h)
– lowered progressively by approximately
(11 mm)
Practical hints
Car care
7
/
inch
16
Technical
Index
data
Advertisement
Table of Contents
