Table of Contents
Advertisement
Instruments
Operation
and controls
Automatic transmission
Selector lever position
The current selector lever position is indicated in the
gear range indicator display. The automatic gear
shifting process can be adapted to specific operating
conditions using the selector lever.
Instrument
Driving
cluster display
240
Practical hints
Car care
Park position
The park position is to be used when parking the
vehicle. Engage only with the vehicle stopped.
The park position is not intended to serve as a
brake when the vehicle is parked. Rather, the
driver should always use the parking brake in
addition to placing the selector lever in park to
secure the vehicle.
Note:
The electronic key can only be removed from the
starter switch with the selector lever in
position "P". With the electronic key removed, the
selector lever is locked in position "P".
Reverse gear
Shift to reverse gear only with the vehicle
stopped.
Dependent on the program mode selector switch
position "S" or "W" the maximum speed in the
reverse gear is different. However, it is not
possible to change the program mode while in
reverse.
Technical
Index
data
Advertisement
Table of Contents
