Table of Contents
Advertisement
Storing positions into memory
Driver's seat: with the electronic key in starter switch
position 1 or 2 or with the driver's door open.
Front passenger seat and rear seats: with electronic key
in starter switch position 1 or 2 or the relevant doors
open.
Adjust the seat and multicontour backrest to the desired
position. You can also adjust the steering wheel, the
exterior rear view mirrors electrically and the inside
rear view mirror by hand for the driver's seat. See
page 104 for exterior rear view mirror adjustment and
page 102 for steering wheel adjustment.
Push memory button "M", release and push a stored
position button "1", "2" or "3" within 3 seconds.
Memory function
Instruments
Operation
and controls
109
Instrument
Driving
cluster display
Recalling positions from memory
To recall a seat/steering wheel and rear view mirror
position, push and hold button "1", "2" or "3" until seat/
steering wheel and rear view mirror movement has
stopped.
The seat/steering wheel and rear view mirror
movement stops when the button is released.
Caution!
Do not operate the power seats using the memory
button if the seat backrest is in an excessively reclined
position. Doing so could cause damage to front or rear
seats.
First move backrest to an upright position.
Practical hints
Car care
Technical
Index
data
Advertisement
Table of Contents
