List Of Parts; Accessories; Assembling Your Musketeer Advantage - Minelab Musketeer Advantage Instruction Manual

Page 4

List of Parts

The box in which your Musketeer Advantage is shipped should contain the
following items. When you first receive your Musketeer Advantage, please
check that all of these items are in the box:
Part Description
Advantage Control Box
TS800 Slimline Coil
Or TS1000 Slimline Coil
Two-Piece Shaft Assembly
Black Armrest
Armrest Cover
Alkaline Battery Pack
Nylon Bolt 1.5" x 1/4" (1 off)
Nylon Bolt 2" x 1/4" (2 off)
Nylon Wing Nut 1/4" (3 off)
Teardrop Washer (4 off)
Velcro Tape - Felt
Velcro Tape - Hook
Warranty Card
This Instruction Manual
Since there may be a range of options available in this detector type,
equipment may vary according to the model or country of issue. Certain
descriptions and illustrations may differ (in this manual) from the exact
model that you have purchased. In addition, Minelab reserve the right
to respond to ongoing technical progress by introducing changes in
design, equipment and technical features at any time.
The Minelab Musketeer Advantage
Part Number
2021-0045
2021-0046
8012-0022
8011-0002
8001-0013
0311-0021
4001-0001
4001-0003
4002-0003
4005-0006
8507-0001
8507-0002
5303-0001
4901-0038
Instruction Manual

Accessories

To further enhance your Advantage and give you greater capacity and
versatility, the following items are available for you to purchase:
Part Description
• TS800 Slimline Coil
• TS1000 Slimline Coil
• Rechargeable NiMH Battery Pack
• Mains NiMH Charger
• 12V NiMH Vehicle Battery Charger
• Control Box Hip Mount Bag
• RPG Headphones
• Blue Minelab Cap
• Blue Minelab Polo Shirt, Blue Minelab Jacket
* Ask dealer for correct part number

Assembling Your Musketeer Advantage

Please follow these simple instructions to assemble your new Musketeer
Advantage. Refer to the drawings to identify parts and how they are
positioned. If you have any difficulties, please contact your dealer for further
instructions.
Armrest / Upper Shaft Assembly
a) Remove the black nylon bolt and wing nut
(1) from the armrest (2).
b) With the cup of the armrest positioned up
(so that your arm rests in the cup and your
hand comfortably grips the foam handgrip),
slide the armrest (2) onto the end of the
black upper shaft (3).
c) Push the nylon bolt (1) through the holes
and tighten the wing nut by hand.
Page 5
Part Number
2021-0045
2021-0046
0311-0019
Region Specific*
0302-0038
3001-0034
4523-0018
5306-0013
Size Specific*
Figure 1 - Armrest
Assembly