Ie Configuration; Tcp/Ip Configuration; Configuring Pc (Windows 2000) - Atlantis Land WebShare 141 W Quick Start Manual

best and easy way is to configure the PC (client DHCP) to get an IP address from the
WebShare Wireless Router ADSL2+.
Please follow the steps below for PC‟s network environment installation. First of all,
please check your PC‟s network components. The TCP/IP protocol stack and Ethernet
network adapter must be installed. If not, please refer to MS Windows relative
manuals.
Before you configure this WebShare Wireless Router ADSL2+, you need to know the
following default settings:
 Username: admin
 Password: atlantis
 IP address (192.168.1.254), Subnet Mask (255.255.255.0)
 DHCP Server: enable (from 192.168.1.100 to 192.168.1.199)
 WAN=PPPoA Routing, VPI=8, VCI=35, VC-Mux
 SSSID= A02-RA141-W54, Channel=6, WEP/WPA=disable

1.6 IE Configuration

Now open IE, go to Instruments menu, select the Connections tab and select one
of the following options:
 Never use remote connection
 Use remote connection if another network connection isn‟t available

1.7 TCP/IP Configuration

Configuring PC (Windows 2000)

1. Go to Start / Settings / Control Panel. In the Control Panel, double-click
on Network and Dial-up Connections.
2. Double-click LAN Area Connection.
3. In the LAN Area Connection Status window, click Properties.
4. Select Internet Protocol (TCP/IP) and click Properties.
5. Select the Obtain an IP address automatically and the Obtain DNS
server address automatically radio buttons.
39