INTRODUCTION Atlona Technologies’ new AT-HDF20SR Mini-HDMI (Sender and Receiver) unit is a low cost Fiber Optic HDMI Transmission solution. These extremely small framed units will carry HDMI v1.3 digital Audio/Video signal through multimode fibers ( SC connection ) allowing any HD Display to extend resolutions up to 400m (1320FT ) at WUXGA (1920x120 @ 60Hz) or full range of HDTV resolutions 720p/1080i/1080p.
2. Connect (SC type) Multimode fiber from Sender unit to Receiver by connecting one unit’s fiber optical port to the others. 3. Connect the AT-HDF20SR (Transmitter) HDMI video input to the HDMI video source. 4. Next, connect the AT-HDF20SR (Receiver) HDMI video output directly to the HDMI video receiver.
Use only accessories recommended by ATLONA to avoid fire, shock or other Do not modify the wall plug. hazards. Doing so will void the warranty and safety features.
Product, or repair or replacement of the Product that does not meet this Limited Warranty and which is returned to Atlona Technologies with a copy of Customer’s receipt. This Limited Warranty is void if failure of the Product has resulted from accident, abuse, or misapplication.
At Atlona, we respect and protect your privacy and assure you that your registration information is completely secure. Of course, Atlona product registration is totally voluntary and failure to register will not diminish your limited warranty rights. To register go to www.atlona.com/registration...
Need help?
Do you have a question about the AT-HDF20SR and is the answer not in the manual?
Questions and answers