Denon AVR-2313CI Owner's Manual page 21

Connecting a media player
• This section describes how to connect when your media player does not support HDMI connections.
For instructions on HDMI connections, see "Connecting an HDMI-compatible device" (vpage 7).
• When recording analog audio, use the analog connection. See "REC OUT mode"
operating instructions.
n Audio connection
The following methods are available for connecting to this unit. Use either of the methods to make
a connection.
The numbers prefixed with connectors indicate the recommendation order. The smaller the number is,
the higher playback quality is achieved.
a DIGITAL AUDIO COAXIAL connector
DIGITAL AUDIO OPTICAL connector
When a multichannel audio (digital bit stream audio) is input, this unit decodes the audio to play
back surround sound.
When making this type of connection, you must change the settings on this unit.
(v Input connector setting )
s AUDIO IN/OUT (MEDIA PLAYER) connector
This makes an analog audio connection. This type of connection converts digital audio to analog
audio, so the output audio may be degraded compared to connections a.
n Video connection
The following methods are available for connecting to this unit. Use either of the methods to make
a connection.
The numbers prefixed with connectors indicate the recommendation order. The smaller the number is,
the higher playback quality is achieved.
a COMPONENT VIDEO IN connector
This makes an analog video connection. This connection method separates video signals into 3
signals for transmission based on color components, achieving the best quality video playback
among analog video connections, with less signal degradation.
When making this type of connection, you must change the settings on this unit.
(v )
Input connector setting
s VIDEO IN/OUT (MEDIA PLAYER) connector
This makes an analog video connection.
DVD
Input connector setting
When making the following connection, you must change the input connector settings.
a DIGITAL AUDIO COAXIAL connector
(vpage 92) for When connecting to connectors marked as 1, change "CBL/SAT" to "MEDIA PLAYER".
DIGITAL AUDIO OPTICAL connector
When connecting to connectors marked as 1, change "TV AUDIO" to "MEDIA PLAYER".
a COMPONENT VIDEO IN connector
When connecting to connectors marked as 1, change "CBL/SAT" to "MEDIA PLAYER".
For how to change, see "Input Assign" (vpage 115).
Media player
AUDIO
AUDIO COAXIAL
OUT OUT
L R
s a
L R
or
L R
NOTE
To record video signals through this unit, use the video cable for connection between this unit and the
player.
18
Connecting an HDMI-incompatible device
VIDEO AUDIO
OPTICAL COMPONENT VIDEO VIDEO AUDIO
OUT OUT OUT IN
Y P P L
B R
a a s s
L
or or
L
VIDEO
VIDEO
IN
R
s
R
R