Denon AVR-2313CI Owner's Manual page 132

Language
Set the language for display on the menu screen.
English / Français / Español
"Language" can also be set by the following procedure. However, the menu screen is not displayed.
Following the display content to make the setting.
ZONE2/REC SOURCE
1. Press and hold the main unit's
"V.Format : <NTSC>" appears on the display.
DIMMER
2. Press the main unit's and set "Lang. : <ENGLISH>".
TUNER PRESET CH +, –
3. Use the main unit's
STATUS
4. Press the main unit's to complete the setting.
ZONE2 Setup
Set the audio to play back with ZONE2.
• "ZONE2 Setup" is displayed when "ZONE2" is selected with "Assign Mode" (vpage 120).
Setting items
Bass –10dB – +10dB (0dB)
Adjust bass tones.
Treble –10dB – +10dB (0dB)
Adjust treble tones.
High Pass Filter On : The low range is attenuated.
Make settings for cutting Off : The low range is not attenuated.
the low range to reduce
distortion in the bass.
Lch Level –12dB – +12dB (0dB)
Adjust the left channel
output level.
Rch Level –12dB – +12dB (0dB)
Adjust the right channel
output level.
Channel Stereo : Select stereo output.
Set the signal output from Mono : Select monaural output.
multi-zone.
DVD
Default settings are underlined.
Setting details
STATUS
and for at least 3 seconds.
and set the language.
Default settings are underlined.
Setting details
Setting items
Volume Level Variable : Volume adjustment is enabled by main unit and remote control
Set the volume output level. unit.
–40dB (40) : Fix volume at –40 dB. Set when adjusting volume by external
amplifier.
0dB (80) : Fix volume at 0 dB. Set when adjusting volume by external
amplifier.
When "Assign Mode"
"Volume Level" setting is automatically set to "Variable".
Volume Limit Off : Do not set a maximum volume.
Make a setting for 60 (–20dB) / 70 (–10dB) / 80 (0dB)
maximum volume.
This is displayed from –79 dB to 18 dB when "Scale" (vpage 106)
is set to "–79.5dB – 18.0dB".
Last : Use the memorized setting from the last session.
Power On Volume
Define the volume setting Mute : Always mute when power is turned on.
that is active when the 1 – 98 (–79dB – 18dB) : The volume is adjusted to the set level.
power is turned on.
This is displayed from –79 dB to 18 dB when "Scale" (vpage 106)
is set to "–79.5dB – 18.0dB".
Mute Level Full : The sound is muted entirely.
Set the amount of –40dB : The sound is attenuated by 40 dB down.
attenuation when muting –20dB : The sound is attenuated by 20 dB down.
is on.
Zone Rename
Change the display title of each zone to one you prefer.
MAIN ZONE / ZONE2
• Up to 10 characters can be input.
• For character input, see page 101.
129
Setting details
(vpage 120) is set to "ZONE2", the
Setting details
General