Denon AVR-2313CI Owner's Manual page 113

Picture Adjust
Picture quality can be adjusted.
We recommend leaving the settings unchanged from the default settings. First adjust the display image
quality on your TV, and use this menu only when you want to make fine adjustments.
• This item can be set when the input source is
MEDIA PLAYER CD NETWORK TV AUDIO .
• With input sources other than the ones above, this item can be set when "Video Source" is selected. In
this case, the original input source settings are called out.
• Can be set when the "Video Conversion" setting (vpage 111) is "On".
• "Blu-ray", "GAME", "CD" or "TV AUDIO" can be set when "HDMI" or "COMP" (vpage 116) has
been assigned.
Setting items
Contrast –6 – +6 (0)
Adjust picture contrast.
Brightness 0 – +12
Adjust picture brightness.
Saturation –6 – +6 (0)
Adjust picture chroma level
(saturation).
Hue –6 – +6 (0)
Adjust green and red
balance.
Off / Low / Medium / High
Noise Reduction
Reduce overall picture
noise.
Enhancer 0 – +12
Emphasize picture contours.
• "Picture Adjust" can not be set when component video and video signals are output.
• "Picture Adjust" can not be set when 4K signals are input.
DVD
Default settings are underlined.
CBL/SAT DVD Blu-ray GAME AUX
Setting details
HDMI Setup
Make settings for HDMI video/audio output.
Setting items
On : Compensated.
Auto Lip Sync
Make automatic Off : Not compensated.
compensation for timing
shift in audio and video
output.
AVR : Play back through speakers connected to the unit.
HDMI Audio Out
Select HDMI audio output TV : Play back through TV connected to the unit.
device.
• The audio signal input from the HDMI input connector can be output as
an output signal from the HDMI output connector by setting the HDMI
audio output destination to TV.
Audio signals input via the Analog/Coaxial/Optical input connectors
cannot be output from the HDMI output connector.
• When the HDMI control function is activated, priority is given to the TV
audio setting
Auto (Dual) : The presence of a TV connected to the HDMI MONITOR
Video Output
Make settings for HDMI 1 or HDMI MONITOR 2 connector is detected automatically, and that TV
monitor output. connection is used.
Monitor 1 : A TV connected to the HDMI MONITOR 1 connector is always
used. Video is not output from the TV connected to the HDMI MONITOR
2 connector.
Monitor 2 : A TV connected to the HDMI MONITOR 2 connector is always
used. Video is not output from the TV connected to the HDMI MONITOR
1 connector.
• If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are
connected and "Resolution" (vpage 112) is set to "Auto", the signals
are output with a resolution compatible with both TV.
• With "Resolution"
the TV you are using is compatible with the resolution under "Video" –
"Monitor" (vpage 131).
NOTE
Depending on the monitor you have connected, the display may not
be correct when you set to "Auto (Dual)". In such a case, set to either
"Monitor 1" or "Monitor 2".
110
Default settings are underlined.
Setting details
(vpage 89 "HDMI control function").
(vpage 112) not set to "Auto", check whether
v See overleaf
Video