Denon AVR-2313CI Owner's Manual page 110

Setting items
Dynamic EQ On : Use Dynamic EQ.
Solve the problem of Off : Do not use Dynamic EQ.
deteriorating sound quality
as volume is decreased
is displayed when set to "On".
by taking into account
human perception and
NOTE
room acoustics. Works with
When the menu "Dynamic EQ" setting is "On", it is not possible to do
MultEQ ® XT.
"Tone Control" (vpage 105) adjustment.
Reference Level Offset 0dB (Film Ref) : This is the default setting and should be used when
Audyssey Dynamic EQ ® is
listening to movies.
referenced to the standard 5dB : Select this setting for content that has a very wide dynamic range,
film mix level. It makes such as classical music.
adjustments to maintain 10dB : Select this setting for jazz or other music that has a wider dynamic
the reference response range. This setting should also be selected for TV content as that is usually
and surround envelopment mixed at 10 dB below film reference.
when the volume is turned 15dB : Select this setting for pop/rock music or other program material
down from 0 dB. However, that is mixed at very high listening levels and has a compressed dynamic
film reference level is not range.
always used in music or
Setting is enabled when "Dynamic EQ" is "On" (vpage 107).
other non-film content.
Dynamic EQ Reference
Level Offset provides three
offsets from the film level
reference (5 dB, 10 dB, and
15 dB) that can be selected
when the mix level of the
content is not within the
standard. Recommended
setting levels are shown at
right.
Dynamic Volume Heavy : Most adjustment to softest and loudest sounds.
Solve the problem of large Medium : Medium adjustment to loudest and softest sound.
variations in volume level Light : Least adjustment to loudest and softest sounds.
between TV, movies and Off : Do not use "Dynamic Volume".
other content (between
quiet passages and
• is displayed when set to "Heavy", "Medium" or "Light".
loud passages, etc.) by
• If "Dynamic Volume" is set to "Yes" in "Audyssey ® Setup"
automatically adjusting to
(vpage 29), the setting is automatically changed to "Medium".
the user's preferred volume
setting.
DVD
Setting details
107
Setting items
Audyssey DSX ® On : Turn Audyssey DSX ® processing for height or wide expansion.
Off : Do not set Audyssey DSX ® .
Provides more immersive
surround sound by adding
NOTE
the front height or front
"Audyssey DSX ® " cannot be configured if the HD Audio source being
wide channels.
played includes Front height and Front wide channels. In this case, the
respective channels are played back using the input signals.
Stage Height –10 – +10 (0)
Adjust sound stage height
when using front height
• "Audyssey DSX ® " can be set when you are using front height speakers
speakers.
or front wide speakers.
• "Audyssey DSX ® " is only valid when using a center speaker.
• "Audyssey DSX ® " is valid when surround mode is DOLBY listening
mode or DTS listening mode other than PLgz Height.
About Audyssey Dynamic Surround Expansion (A-DSX)
Audyssey DSX ® is a scalable system that adds new speakers to
improve surround impression.
Starting with a 5.1 system Audyssey DSX ® first adds Wide channels
for the biggest impact on envelopment. Research in human hearing has
proven that information from the Wide channels is much more critical
in the presentation of a realistic soundstage than the Back Surround
channels found in traditional 7.1 systems. Audyssey DSX ® then
creates a pair of Height channels to reproduce the next most important
acoustical and perceptual cues. In addition to these new Wide and
Height channels, Audyssey DSX ® applies Surround Envelopment
Processing to enhance the blend between the front and surround
channels.
Stage Width –10 – +10 (0)
Adjust sound stage width
when using front wide
speakers.
Audio
Setting details