Denon AVR-2313CI Owner's Manual page 111

Graphic EQ
Use the graphic equalizer to adjust the tone of each speaker.
"Graphic EQ" can be set when "MultEQ ® XT" setting (vpage 106) is "Graphic EQ".
Setting items
Speaker Selection All : Adjust the tone of all speakers together.
Select whether to adjust Left/Right : Adjust the tone of left and right speakers together.
tones for individual speakers Each : Adjust the tone of each speaker.
or for all speakers.
Adjust EQ q Select the speaker.
Adjust tones for each w Select the adjustment frequency band.
frequency band. Adjust 63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
the speaker selected in • Select the speakers you want to adjust when "Left/Right" or "Each"
"Speaker Selection". is selected.
e Adjust the level.
–20.0dB – +6.0dB (0.0dB)
Curve Copy Yes : Copy.
Copy "Audyssey Flat" No : Do not copy.
(vpage 106) curve from
MultEQ ® XT.
• "Curve Copy" is displayed after Audyssey ® Setup has been performed.
• When you select "Curve Copy" and press
Flat"?" prompt is displayed. Select either "Yes" or "No", and press
ENTER
.
Set Defaults Yes : Reset to the defaults.
The "Graphic EQ" settings No : Do not reset to the defaults.
are returned to the default
When you select "Set Defaults" and press
settings.
ENTER
, the "Reset to the default values?"
prompt is displayed. Select either "Yes" or
"No", and press
DVD
Default settings are underlined.
Setting details
ENTER
, the "Copy "Audyssey
ENTER
.
Audio
108