Volvo XC90 Owner's Manual page 53

02 Instruments and controls
Switches in the centre console
3. Fold the door mirror inward and then out-
ward using the button.
02
The door mirrors have now returned to their
original fixed positions.
Park Assist*
The system is always activated
when the car is started. Press
the button to deactivate/reacti-
vate the parking assistance
system. See also page 143.
Deactivation of the deadlocks* and
detectors
Use this button when you wish
to switch off the deadlock func-
tion (doors cannot be opened
from the inside when locked).
This button can also be used
when deactivating the alarm
system's movement and tilt detectors*. The
lamp illuminates when these systems are shut
down/deactivated, see pages 118 and 122.
Auxiliary lamps*
Use this button to switch the
auxiliary lamps on with main
beam or to switch them off.
*
52
Option/accessory, for more information, see Introduction.
Active Bi-Xenon lights, ABL*
The ABL headlamps' headlamp
pattern follows the movements
of the steering wheel during
driving. The function is acti-
vated automatically when the
car is started and can be deac-
tivated/activated by pressing the button. The
lamp in the button illuminates when the func-
tion is activated
Shifting headlamp pattern for right/left-
hand traffic
Hold the button depressed for at least 5 sec-
onds. The car must be stationary when the
headlamp pattern is shifted. The message
DIPPED BEAM SETT. F. RIGHT TRAFFIC
DIPPED BEAM SETT. F. LEFT TRAFFIC
shown in the display. For more information and
adapting headlamp pattern for halogen or Bi-
Xenon headlamps, see page 161.
Electric socket, (standard)/Cigarette
lighter*
The electrical socket can be
used for 12 V accessories, such
as mobile phone chargers and
coolers.
The ignition key must be at least in position I
so that the socket can supply power.
The cigarette lighter is activated by pushing in
the button. The button pops out when the
lighter is hot. Pull out the lighter and light a cig-
arette on the heated coils. For safety reasons,
always keep the cover in place when the
socket is not in use. Maximum current tap 10 A.
WARNING
Always leave the plug in the socket when
the socket is not in use.
BLIS - Blind Spot Information System*
Press the button to deactivate
or reactivate the function. see
page 145 for further informa-
or
tion.
is