Volvo XC90 Owner's Manual page 210

5. Press the clamp spring upwards and a little
to the left so that it secures in its catch.
6. Press the connector back in place and refit
the cover.
Active Bi-Xenon headlamps
1. Switch off all lights and turn the ignition key
to position 0.
2. Remove the cover.
3. Turn the bulb anticlockwise and pull it out.
4. Undo the connector by pressing the catch
out and then pulling.
5. Plug the connector into the bulb, a click is
heard.
6. Refit the bulb, turn it in position.
7. Refit the cover.
Side marker lamps and position/
parking lamps
The bulbs are housed in bayonet holders.
1. Turn the bulb holder anticlockwise and
remove.
2. Pull the bulb straight out.
3. Fit the new bulb by carefully pressing it into
the recess.
4. Fit the bulb holder back in place and turn
clockwise.
09 Maintenance and service
Replacing bulbs
Direction indicators
The bulbs are housed in bayonet holders.
1. Turn the bulb holder anticlockwise and
remove.
2. Press in the bulb, turn anticlockwise and
remove.
3. Fit the new bulb by pressing it into the
recess and then turning clockwise.
09
209