RELEASED FOR PRODUCTION
SERVICE TOOLS:
IMPORT/EXPORT
IMPORT/EXPORT
MAIN SWITCH
To Import drink/machine settings:
1. Turn off the power switch.
2. Remove 4 screws and the top cover.
PROGRAMMING
Page 13
DIR Num: 49251.0000
Diagnostics
Calibrate
Import/Export
Factory Defaults
Settings
1. Carefully insert USB flash drive into socket. NOTE:
Make sure no other files are stored on drive other
than what you are updating.
2. Turn on power switch. Go to Import/Export screen.
Press "Import". Allow files to finish loading.
3. Turn off the power switch.
4. Remove USB drive.
5. Re-install 4 screws and the top cover.
6. Turn on power switch.
To export machine settings:
1. Follow same procedures as above, except press "Ex-
port" to copy drink/machine settings to the flash drive.
08, July 2014
Page 14
Page 16
49251.0 062014