Programming - Bunn My Cafe MCO Installation & Operating Manual

RELEASED FOR PRODUCTION

PROGRAMMING

Programming lockout switch
1. Disconnect brewer from power source.
2. Remove four screws and top cover.
3. Locate the slide switch on control board (behind display assembly).
Down=normal, up=locked.
NOTE: When locked, only "time and date" can be changed, all other screens will display "READ ONLY".
NOTE: Brewer MUST be powered down each time switch is moved in order for the change to take effect.
Page 9
49251.0 041014
DIR Num: 49251.0000 08, July 2014