Canon imageFORMULA P-208 User Manual page 48

If you set [Check output after scanning] to [ON], you can check
the output settings after scanning.
If you set [Enable continuous scanning] to [ON], you can
continue scanning after all the pages of the document are
scanned.
Click the Start button.
3
The document is scanned. While scanning is in progress, the number of pages
scanned is displayed in addition to the scanner settings.
When all the pages of the document are scanned, the scanned images are
output according to the registered job settings and the complete screen
appears.
47
If you configure scanning conditions that consume a large amount of
the computer's memory, scanning may stop because of insufficient
memory. If an error message appears due to insufficient memory
while scanning is in progress, stop scanning, change the scanning
conditions, and then try scanning again.
A multiple-page scan cannot be saved when it reaches the file size of
2 GB. Change the save settings if an error message is displayed.
Clicking [Return to top] returns to the top screen of Select
Scan Job.
When [Attach to E-mail] or [Print] is specified as the output
method, you can click [Open storage folder] to open the folder
in which the scanned images were saved.
When [Enable continuous scanning] is set to [ON]
The continuous scanning screen appears when all the pages of the
document are scanned. -> "Operation in Continuous Scanning Screen" on
p.51
If you want to scan another document, place the document in the scanner
and then click [Scan].
When scanning of all the documents is finished, click [Next step].