Before Using For The First Time; Toasting Bread - Russell Hobbs RHGT17 Instructions And Warranty

OPERATING INSTRUCTIONS

Before using for the first time

1. Ensure all packaging, swing tags and promotional labeling has been removed
from the toaster and check that the toasting slots are empty before connecting to
the wall power outlet.
2. Position your toaster in a well-ventilated area, on a firm, level, heat-resistant
surface, clear of curtains, drapes and other combustible materials.
3. Plug the power cord into the wall power outlet and switch on.
4. Turn the browning control to the highest setting (7).
5. Now operate the toaster (without any bread inside) by pressing down the bread
carriage lever until it locks into place. This process will cure the new elements
and burn off any dust, residues, etc., which may have accumulated on the
elements. The new elements may give off an odour and a small amount of
vapour whilst burning in; this is normal. The toaster will shut itself off after a few
minutes. It is now ready for toasting.
Positioning
1. Position your toaster on a firm, level, heat-resistant surface, clear of curtains,
drapes and other combustible materials.
2. Do not place the toaster on or near items that may become damaged even by
moderate sources of heat.
3. Shorten the power cord by wrapping the excess cord around the clips
underneath the toaster.

Toasting bread

1. Plug the power cord into the wall power outlet and switch the outlet on.
2. Set the browning control to the desired level (1 to 7).
3. Place the bread into the toasting slot.
6