Engine Oil Dipstick; Engine Oil Check - Ford 2013 Explorer Owner's Manual

Hide thumbs Also See for 2013 Explorer:

Table of Contents

Engine shield

Some vehicles may be equipped with an aero-shield under the engine.

This shield needs to be removed for service, including oil and filter

changes. It is secured with four quick release fasteners.

ENGINE OIL DIPSTICK

Note: Check the level before starting the engine.

Note: Make sure that the level is between the MIN and MAX marks.

1. Make sure that your vehicle is on level ground.

2. Turn the engine off and wait 10 minutes for the oil to drain into the

3. Remove the dipstick and wipe it with a clean, lint-free cloth. Replace

the dipstick and remove it again to check the oil level.

If the level is at the MIN mark, add oil immediately.

Adding engine oil

Note: Do not remove the filler cap when the engine is running.

Note: Do not add engine oil further than the MAX mark. Oil levels above

the MAX mark may cause engine damage.

2013 Explorer (exp)

Owners Guide gf, 2nd Printing