Memory Function - Ford 2013 Explorer Owner's Manual

168
MEMORY FUNCTION (IF EQUIPPED)
Programming a memory position
Note: A memory position may be programmed at any time.
• To program position 1, move the memory features to the desired
positions using the associated controls. Press and hold button 1 for at
least two seconds. A chime will sound confirming that a memory
position has been set.
• To program position 2 and 3, repeat the previous procedure using the
respective buttons.
Recalling a memory position
A programmed memory position can be recalled:
• in any gearshift position if the ignition is not on.
• only in position P or N if the ignition is on.
Press the desired memory control to recall a memory position.
Recalling memory positions with the remote control
The memory positions are also recalled when you press unlock on your
remote control (if the transmitter is programmed to a memory position)
or, when you enter a valid personal entry code that is programmed to a
memory position. If the easy entry feature is enabled, the seat will first
move to the easy entry position. The seat will move to the final position
when the key is in the ignition or when the push button start system (if
equipped) is put in accessory mode/started.
To program the memory feature to a remote control, refer to Keys and
remote control.
2013 Explorer (exp)
Owners Guide gf, 2nd Printing
USA (fus)
Seats
This memory control, located on the
driver's door, allows automatic
positioning of the driver seat, power
mirrors, steering column (if
equipped) and power adjustable
foot pedals (if equipped) to three
programmable positions.