Ford 2013 Explorer Owner's Manual page 26

Hide thumbs Also See for 2013 Explorer:

Table of Contents

Perform the following steps when installing the child seat with

combination lap and shoulder belts:

Note: Although the child seat illustrated is a forward facing child seat,

the steps are the same for installing a rear facing child seat.

Note: The Lock-off device on some child restraints may not

accommodate the shoulder portion of the inflatable safety belt. Follow all

instructions provided by the manufacturer of the child restraint

regarding the necessary and proper use of the Lock-off device. In some

instances these devices have been provided only for use in vehicles with

safety belt systems that would otherwise require a locking clip. This

vehicle does not require the use of a locking clip.

2. After positioning the child safety seat in the proper seating position,

do the following:

2013 Explorer (exp)

Owners Guide gf, 2nd Printing

Child Safety

1. Position the child safety seat in a

seat with a combination lap and

shoulder belt.

• Standard safety belt: pull down

on the shoulder belt and then

grasp the shoulder belt and lap

belt together behind the belt