Operation; Display And Buttons - Eaton 9EEBM240 User Manual

4.OPERATION

4.1 Display and Buttons

The following tables shows the buttons, LCD indicator and LED indicator
status and description:
Table 4-1 Control Buttons Functions
The Button Function
Turn on
Turn off
Transfer
Function key
Fig. 4-1 Control Panel
Illustration
If the UPS is in standby or bypass mode, press >2s,
the buzzer will beep once, then the UPS system will
be turned on.
If the UPS is in line, battery, HE or battery test mode,
press >3s, the buzzer will beep once, then the UPS
will be turned off.
If the UPS is in fault mode, and the fault cause has
disappeared, press >2s, the buzzer will beep once,
fault will be cleared and UPS will turn to standby
mode.
Battery test on line mode,Press the button >2s
Mute: Press the button >2s
Down to next page: Press the button<200ms
24