Technical Specifications - Russound R850MC Installation Manual

TECHNICAl SPECIFICATIONS

R850MC Amplifier
Single Zone Maximum Output Power:
All Zones Continuous Output Power:
Distortion THD+N:
Signal-to-Noise Ratio:
Frequency Response:
Input Sensitivity:
Input Impedance:
Voltage Gain:
Delay Time:
Input Trigger:
Output Trigger:
Power Requirements:
Fuse Rating:
Power Requirements:
Fuse Rating:
Standby Power:
Dimensions:
Weight:
The R850MC Amplifier meets EU Standby Power Requirements
8
50W per channel, 2 channels at 8 ohms
(0.1% THD+N; f=1 kHz) 80W per channel,
2 channels at 4 ohms
140W at 8 ohms, 2 channels bridged
35W per channel, 8 channels at 8 ohms
50W per channel, 8 channels at 4 ohms
100W at 8 ohms, each zone bridged
<0.05% 8 Ohm, from 20Hz to 20kHz
>100dB
20Hz to 20KHz +/- 0.3dB
70mV for 1W at 8 ohms
500mV for 50W at 8 ohms
47kohms Line Input
32dB
0.5 to 4.5 minutes
12VDC 10kohms
12VDC 100 mA
North American Model:
100-120VAC 60Hz 1000W
IEC 320 type connector with 3 terminal
detachable power cord.
T10AL 250V
European Model:
220-240VAC 50Hz 1000W
IEC 320 type connector with 3 terminal
detachable power cord.
T5AL 250V
< 0.5 W
17" W x 16.5"D x 5.875"H (43 x 42 x 15 cm)
29.6 lbs. (13.4 kg)
Russound R850MC Installation Manual Rev. 3