Mounting The Decor-Style Panel On Plasterboard (Dry Wall) - AMX AXD-CV6 Instruction Manual

Mounting the Decor-style panel on plasterboard (dry wall)

1. Remove the magnetically attached Decor faceplate (A in FIG. 8) from the main AXD unit
(B in FIG. 8) by gripping the faceplate and pulling with gentle force.
Install the 2 drywall
clips and screws
(included) into the
A - Decor
faceplate
FIG. 8 Decor-style panel installation configuration for drywall surfaces
The drywall clip set must be re-ordered from AMX if the drywall clip is bent
accidentally during an installation or removed during a re-installation.
2. Cut out the install surface using the dimensions shown in FIG. 9. Be sure to cut out the two
notches along the side of the CV6 to accommodate the two provided drywall expansion clips.
.12
2.900
FIG. 9 Decor-style panel installation configuration for plasterboard
6" Color Video Wall Panel
holes
Front view
6.79
(BEZEL)
6.21
5.97
ZERO RADIUS
TYP. ALL CORNERS.
.140 DIA HOLES
(CUTOUT)
CUTOUT
B - Main AXD unit consists of
the touch panel and housing
2.45
[62.2 MM]
2.09
[53.1 MM]
.30 [7.6 MM]
MAX
.28 REF
1.71
5.37
(BEZEL)
5.37
4.43
1.00
[136.5 MM]
.25 TYP
Installation
Flat surface
(can include a
wall, podium, or
other level
surface)
2 notches are
required if the unit
is installed in
drywall using the (2)
provided clips
Side view
4.37
[110.9 MM]
7