Trap Assembly; Bug Bag Installation; Assembly Instructions - Mosquito Magnet Commander Operation Manual

Hide thumbs Also See for Commander:

Table of Contents

Available languages

Trap Assembly:

Step 1

Place base upside down on a flat surface, unfold U-

shaped support leg until it locks in place.

Step 2

Turn base and leg assembly right-side-up and place

support pole into cavity on base.

To insert Bug Bag, first engage front/open section then gently

push the back end down into

place.Step 4Step 4

Step 3

Place trap power head onto pole. Press down firmly

with two hands to secure.

Assembled trap should have the front of power head/

trumpet placed farthest from the wheels in the same

direction as base U-shaped legs.

Step 4

The battery is not fully charged at the factory; charge

the battery before the first use. Under proper usage,

one charge lasts all season. See page 6 for further

details.

Step 5

Screw antenna onto the face of trap and twist to the

right until tightly secured.

Table of Contents

Do you have a question about the Commander and is the answer not in the manual?