Brother 882-D10 Operation Manual page 143

No. Display
b
Pivot key
c
Free motion mode key
d
Automatic reinforcement
stitch key
e Automatic thread cutting
key
f Horizontal mirror image key After selecting the stitch pattern, use this key to create a horizontal
g Stitch width and stitch
length key
h
Thread tension key
i
Memory key
j Elongation key
k Needle mode selection key
(Single/Double)
l Size selection key
m Image key
n Vertical mirror image key
o Thread density key
p Delete key
q Single/Repeat sewing key
r Back to beginning key
s Home page screen key
t
Screen lock key
u
"L/R SHIFT" key
v Character spacing key
w Function page key
Key Name
Press this key to select the pivot setting. When the pivot setting is
selected, stopping the machine lowers the needle and slightly raises
the presser foot automatically. In addition, when sewing is restarted,
the presser foot is automatically lowered.
• If this key appears as
• Be sure the "Needle Position - UP/DOWN" of Machine Settings is
set to the down position.
Press this key to enter free motion sewing mode.
The feed dog is lowered and presser foot is raised to a height
appropriate for free motion quilting.
Press this key to turn on the automatic reinforcement stitching mode.
Press this key to turn on the automatic thread cutting mode.
mirror image of the stitch pattern.
Shows the stitch width and stitch length of the selected stitch pattern.
The machine default settings are highlighted.
Shows the thread tension setting for the selected stitch pattern. The
machine default settings are highlighted
Use this key to save stitch pattern combinations.
When 7mm satin stitch patterns are selected, press this key to choose
from 5 automatic length settings, without changing the stitch zigzag
width or stitch length settings.
Press this key to choose single needle sewing or twin needle sewing.
Use this key to select the size of the stitch pattern (large, small).
Press this key to display an enlarged image of the selected stitch
pattern.
After selecting the stitch pattern, use this key to create a vertical mirror
image of the stitch pattern.
After selecting the stitch pattern, use this key to change the thread
density of the pattern.
When you make a mistake selecting a stitch pattern, use this key to
delete the mistake. When you make a mistake in combining stitch
patterns, use this key to delete stitch patterns.
Press this key to choose single stitches or continuous stitches.
When sewing is stopped, press this key to return to the beginning of
the pattern.
(For embroidery and sewing machine only)
Press this key to return to the home page screen.
Press this key to lock the screen. When the screen is locked, the
various settings, such as the stitch width and stitch length, are locked
and cannot be changed. Press this key again to unlock the settings.
Press to shift the stitch pattern to the right or press
the pattern to the left. This feature is not available on all patterns. Only
those applicable will be shifted. The machine default setting is
highlighted.
Press this key to change the spacing of character patterns.
Press this key to show all the functions available in this screen.
EDITING STITCH PATTERNS
Explanation
, the pivot function cannot be used.
Page
S-15
S
3
S-40
S-5
S-14
S-86
S-10 to
S-12
S-12
S-95 to
S-96
S-86
"Basic
operations"
S-86
S-88
S-86
S-87
S-78,
S-79
S-86
S-87
–
S-18
S-11
to shift
S-80
S-80
Sewing S-85