Brother 882-D10 Operation Manual page 100

Hide thumbs Also See for 882-D10:
Table of Contents

Advertisement

SEWING THE STITCHES
a
Attach the straight stitch needle plate (see
page S-26).
a Round hole
Memo
• Notice this needle plate has a round hole for
the needle.
b
Select
or
.
c
Press
to set the machine to free motion
sewing mode.
S-42
→ The key appears as
the necessary height, and then the feed dogs are
lowered for free motion sewing.
a
a Free motion quilting foot "C"
→ When stitch Q-01 or 1-30 is selected, free motion
quilting foot "C" is indicated in the upper-left corner
of the screen.
d
Attach free motion quilting foot "C" at the
front with the presser foot holder screw
aligned with the notch in the quilting foot.
a
b
a Presser foot holder screw
b Notch
Note
• Make sure that the quilting foot is attached
properly and not slanted.
, the quilting foot is raised to

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vq2400

Table of Contents