Table of Contents
Advertisement
PE7700-e.book Page 25 Monday, January 10, 2005 11:20 AM
Using the menus
The projector is equipped with on-screen display (OSD) menus for making
various adjustments and settings.
There are eight different menu languages. Refer to Setup Menu on page
more details.
The following example describes the adjustment of the keystone.
1.
Press the MENU/EXIT button to turn the on-
screen menu on.
2.
Use
or
to select Setup and press SOURCE/
ENTER.
3.
Use
or
to select Keystone.
Picture menu
The functions provided in this menu are aiming to adjust image quality by yourself. Before making
adjustments, you are suggested to choose a desired preset mode in this menu which has set some certain values
in order to meet different lighting environment and presentation purposes.
1.
Brightness: Adjusts the brightness of the image.
The higher the value, the brighter the image.
And lower the value, the darker the image.
Adjust this control so the black areas of the
image appear as black and that detail in the
dark areas is visible.
2.
Contrast: Adjusts the degree of difference
between dark and light in the image. The
higher the value, the greater the contrast.
3.
Color: Increase or decrease the color intensity
of the image. The higher the value, the more
vivid and brighter the color.
4.
Tint: Adjusts the color tones of the image. The higher the value, the more greenish the picture becomes.
The lower the value, the more purplish the picture becomes.
5.
Noise Reduce: Reduces electrical image noise. The higher the setting, the less the noise.
4.
Adjust keystone values by pressing
5.
Press the MENU/EXIT button twice* to
leave and save the settings.
*The first press leads you back to the submenu
and the second press closes the on-screen menu.
-30
-30
http://www.pureglare.com.au
27
for
.
50
50
Menus
or
+70
+70
25
Advertisement
Table of Contents
