Table of Contents
Advertisement
PE7700-e.book Page 13 Monday, January 10, 2005 11:20 AM
1
2
3
4
5
6
7
8
8.
PIP and POP buttons (Refer to page
To turn the PIP or POP function on or off, press the PIP or POP button. Adjust the size of the PIP image
by pressing the + or - button. If you want to switch between main window and sub-window, or left
window and right window, toggle ACTIVE so that you can adjust the image settings in the selected
window.
9.
Preset (Refer to page
Selects one of the preset modes to suit your program type.
10. EXIT (Refer to
25
Exits and saves any changes made using the menu.
11. LIGHT
Turns the remote control's backlight on.
1.
POWER (Refer to pages 19,
Press and hold this button to turn the projector on when it is in the
standby mode. Or press this button twice to turn the projector off.
2.
Source buttons (Refer to
Selects an input source to display on the projector.
3.
Aspect buttons (Refer to
Selects the image aspect ratio to suit the input signal.
9
4.
Memory (1, 2, 3 and default) buttons (Refer to
information.)
Restores settings saved in memory locations 1, 2 and 3 or restores the
default settings for the current input source.
5.
Arrows ( / / / ) (Refer to
10
Used to select the desired menu or to make adjustments.
ENTER (Refer to 25 for more information.)
Opens the selected items of the menu.
6.
MENU (Refer to
Turns the on-screen display control menu on or off.
7.
Picture quality adjustment buttons (Refer to
11
information.)
22
for more information.)
21
for more information.)
for more information.)
http://www.pureglare.com.au
23
and
32
for more information.)
27
for more information.)
26
for more information.)
26
25
for more information.)
25
for more information.)
25
for more
for more
Overview
13
Advertisement
Table of Contents
