Electrical Connection - Electrolux WE 170 P User Manual

4 www.electrolux.com
Make sure that all health and safety regulations are
•
obeyed when the appliance is installed in a commercial/
public environment.
Do not install the appliance in a moving platform (e.g. on
•
a ship).
Make sure that the floor where you install the appliance
•
is flat, stable, heat resistant and clean.
Make sure that there is air circulation between the
•
appliance and the floor.
The ventilation openings in the base (if applicable) must
•
not be obstructed by a carpet.
Adjust the feet to have the necessary space between
•
the appliance and the carpet.
Do not install the appliance where the appliance door
•
can not be fully opened.

1.3 Electrical Connection

The appliance must be correctly earthed. The
•
manufacturer is not responsible for the consequences
of an inadequate earthing system.
Always use a correctly installed shockproof socket.
•
Make sure that the electrical information on the rating
•
plate agrees with the power supply. If not, contact an
electrician.
Do not use multi-plug adapters and extension cables.
•
Make sure not to cause damage to the mains plug and
•
to the mains cable.
If the supply cord is damaged, it must be replaced by
•
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
Connect the mains plug to the mains socket only at the
•
end of the installation. Make sure that there is access to
the mains plug after the installation.
Do not touch the mains cable or the mains plug with
•
wet hands.
Do not pull the mains cable to disconnect the appliance.
•
Always pull the mains plug.