Water Connection - Electrolux WE 170 P User Manual

Only for UK and Ireland: The appliance has a 13 amp
•
mains plug. If it is necessary to change the fuse in the
mains plug, use a 13 amp ASTA (BS 1362) fuse.
This appliance complies with the E.E.C. Directives.
•

1.4 Water connection

Make sure not to cause damage to the water hoses.
•
The appliance is to be connected to the water mains
•
using the new supplied hose-sets. Old hose sets must
not be reused.
Before you connect the appliance to new pipes or pipes
•
not used for a long time, let the water flow until it is
clean.
The operating water pressure (minimum and maximum)
•
must be between 0,5 bar (0,05 MPa) and 8 bar (0,8
MPa).
The first time you use the appliance, make sure that
•
there is no leakage.
1.5 Use
Do not change the specification of this appliance.
•
Obey the safety instructions on the detergent
•
packaging.
Obey the maximum load volume of 8 kg (refer to the
•
"Programme chart" chapter).
Do not put flammable products or items that are wet
•
with flammable products in, near or on the appliance.
Make sure that you remove all metal objects from the
•
laundry.
Do not put a container to collect possible water leakage
•
under the appliance. Contact the Authorised Service
Centre to ensure which accessories can be used.
Do not touch the glass of the door while a programme
•
operates. The glass can be hot.
1.6 Care and cleaning
Before maintenance, deactivate the appliance and
•
ENGLISH 5